*
Home
|
Photo Gallery
|
News
|
Articles
|
About US
|
Contact US
Hypregun
Assembly Instructions
Kick Stand Asseembly:
1.Locate two kick stands(74),one hex nut(85),one hex nut(86),two washers(83),one capscrew(87), one capscrew(84),one spring(76),and one washer(82).
2.Locate the kick stand mounting hole on the front Of the base(18).
3.Align the hole in the kick stand with the hole in the yoke.
4.Secure the kick stand into position using capscrew(87),Lock washer(83),and nut(86).The lock washer is to be Positioned between the base and nut.
5.Tighten firmly using the adjustable wrench and socket.
6.Locate the kick stand mounting hole on the back of the Base(18).
7.Align the hole in the kick stand with the hole in the yoke.
8.Secure the kick stand into position using capscrew(87),Washer(82),spring(76),lock washer(83),and nut(85).The washer(82)is to be placed on the capscrew and the Spring against the washer.This assembly is to be placed Through the kick stand and base holes.install the lock Washer and hex net.The nut should be threaded onto The capscrew until the threads appear through the nut. If the nut is tightened too much,the kick stand spring Will be too compressed to allow for free movement of the kick stand.
9.Stand the Hypregun-Plus 5Q upright and place the Kickstand in the down position.
preparing the Hypregun-Plus 5Q for Use
1.Using an adjustable wrench,install the Hose assembly by attaching the L-type swivel to the pump body(33).
2.Raise the follower(34) by connecting the air supply hose to the nipplc(57)located on the base(18)of the gun.
3.Remove the can shield(72)and install It on the five-quart(4.7 litre)can of Nordstrom valve sealant.To prevent the can from splitting at the seam,the Can shield positioned opposite the Seam on the can.The top and bottom of the can shield should not overlap The lip of the can.
4.Apply a coating of light machine oil to the follower wiper(35)before loading the gun with a can of sealant.This will lubricate the seal and allow for easy Entry into the can.
5.The spring loaded kick stand is “kicked”to one side to allow the gun to be tilted backward and rolled.
Products
The sealing compound and lubrication
RAGA GV-100
RAGA GV-200
RAGA HT-650
RAGA API
RAGA COPPER
RAGA HT-500/L
RAGA HT-500/L Special
RAGA HT-500/S
RAGA Valve Cleaner
RAGA ZINC
Grease Pumps
Pneumatic Pumps
Activ-8
Hypregun
Hand-Held Pumps
Hydrulic
SuperGun
Uni-Seal
Adapters
Ball
Plug
Adapter
Articles
Photo Gallery
About Us
Catalog
Links