Plug

Plug Valves Combination Fitting
Features:
• One-piece body
• Double-ball check
• Designed for use in plug valves
• Use as a plunger for injecting sealant sticks or simply attach to your pump using a side-entry or top-entry giant buttonhead coupler
Thread Material Part Number
3/8” – 16UNC Carbon Steel F-NH3/8-CS
1/2” – 13UNC Carbon Steel F-NH1/2-CS
5/8” – 11UNC Carbon Steel F-NH5/8-CS
3/4” – 10UNC Carbon Steel F-NH3/4-CS
Combination fittings can be used as a standard injection fitting when attached to an injection pump or can be used like a packing injector by simply screwing the fitting further into in valve.
Available in carbon steel ONLY.Stainless steel or other materials available by special request.

Thread Material Part Number
1/4” – 18NPS Carbon Steel F-RN1/4-CS
3/8” – 18NPS Carbon Steel F-RN3/8-CS
3/8” – 18NPS Carbon Steel F-RN1/2-CS
3/8” – 18NPS Carbon Steel F-RN3/4-CS
When servicing the valve with an injection pump, back the fitting out of the valve slightly. Inject sealant into the fitting and then disconnect.
If you need additional lubricant/ sealant injected and you do not have injection equipment with you simply screw the fitting further into the valve and the lubricant/ sealant will be injected as if you were using a packing injector.
Available in carbon steel ONLY.Stainless steel or other materials available by special request.
Copyright © 2011 Sealsanat All Rights Reserved.

Design & Production by bazarsazan