Seal Sanat Raga : Adapter

Adapter

Flow Wolf® Leak-Lock Adapter #1

Flow Wolf® Leak-Lock Adapter #2

Material	Part Number
Stainless Steal	D-FW-LL1-SS
Carbon Steel	D-FW-LL1-CS
Leak-Lock Gasket	D-LL-GSK-ASB
This emergency sealing device fits on a leaking or damaged giant buttonhead fitting. Uses a replacable gasket seal. Ideal for old or leaking fittings or when you need to go from giant buttonhead to threaded coupler. Seal type - Gasket

Material	Part Number
Stainless Steal	D-FW-LL2-SS
Carbon Steel	D-FW-LL2-CS
Leak-Lock Gasket	D-LL-GSK-ASB
This emergency sealing device converts a small buttonhead fitting to a giant buttonhead fitting. Uses a replacable gasket seal. Seal type - Gasket

Flow Wolf® Leak-Lock #1 Metal-Seated

LEAK-LOCK ADAPTERS

Emergency Sealing Device for Buttonhead Fittings
Convert leaking or damaed fittings into safe fittings without shut-down or loss of production. Leak-Lock is not a permanent repair device but should be used until a scheduled turn-around or when the pipeline is depressurized and the leaking fitting can be raplaced safely. Also for use on damaged buttonhead fittings.
The new FLOW WOLF® style Leak-Lock Adapter has all the features of a regular Leak-Lock plus an additional metal-to-metal seal (with cap). Will accept liquids and pass the heaviest sealants without plugging off.

Material	Part Number
Stainless Steal	D-FW-LL1-MS-SS
The FLOW WOLF® Leak-Lock #1 Metal-Seated Adapter is designed for use on capped fittings ONLY. It provides and additional check valve so you can continue to service the valve in-line, under pressure. Can be used in applications where a second independent check valve is required to comply with safety codes or company policy. Can be left on permanently or until the pipeline is depressuized and the existing fitting can be replaced safely. Seal type – Metal-to-Metal

Flow Wolf ® Screw-On Adapter

Material	Part Number
Carbon Steel	D-FW-SO-BH
This adapter goes from a standard screw-on fitting (body grease fitting) typically found on wellhead gate valves to a standard large buttonhead fitting. Allows you to quickly service a valve without changing the adapter on your injection equipment. Also extends the fitting length allowing you to get at those hard to reach fittings. Available from stock in carbon ONLY. Stainless steel or other materials available by special request.

Cameron Screw-On Adapter

Material	Part Number
Carbon Steel	D-FW-CAM-SO-CS
This adapter allows you to go from a small Cameron capped fitting thread connection to a standard giant buttonhead fitting or screw-on style. This adapter can be left on permanently to simplify servicing of Cameron valves. Available from stock in carbon steel ONLY. Stainless steel or other materials available by special request.

Daniel Orifice Adapter

Material	Part Number
Stainless Steel	D-OA1/4-SS
Carbon steel	D-OA1/4-CS
This adapter allows you to service a Daniel Senior Orifice fitting as well as allowing you to inject sealant into a standard gate valve stem just like a packing injector. This adapter is designed for Daniel Senior Orifice fittings and allows the technician to inject Valve Cleaner Plus to clean the internal valve sealing surfaces. Can also be used to inject Total-Lube #911 or #5050 sealant in an emergency. Also fits into packing injectors for Valve Cleaner Plus or sealant injection. Available from stock in carbon steel and stainless steel, Other materials and grades available by special request.

Screw-On Relief Valves Coupler

Material	Part Number
Carbon Steel	D-SO-RV
This handy screw-on style coupler includes a built-in needle valve for isolating the hose asswmbly from a leaking check valve in the body grease fitting. Commonly used for wellhead valve maintenance. This screw-on coupler combines a one-way check valve and a release tool. Idea for servicing wellhead gate valves, quickly and easily. In the event that an old or inferior fitting fails during service the coupler can safely be left on until the next scheduled shut-down. Keep a few extra couplers in your kit for this reason. Available in carbon steel ONLY. Stainless steel or other materials available by special request.

Sealweld ® Screw-On Body Vent Tool

Material

Part Number

Carbon Steel

D-SO-BV-CS

This tool is specifically designed to allow you to un-seat the ball check in body grease fitting and sealant injection fittings.
A MUST when servicing many types of wellhead gate valves.
Also idea for equalizing pressure when servicing wellhead gate valves.
Available in carbon steel ONLY.

Giant Buttonhead Couupler

Top-Entry Buttonhead Coupler

Material	Part Number
Carbon steel	H-CPSG-2
The Sealweld ® giant buttonhead side-entry coupler allows you to quickly attach on to standard giant buttonhead fitting s for fast service. Features – metal button with spring. Available in carbon steel ONLY.

Material	Part Number
Carbon Steal	H-CPSG-3
The top-entry buttonhead coupler allows you to easily gain entry to buried or confined valves. Features - metal button with spring. Available in carbon steel ONLY.

Sealweld ® Screw-On Coupler

Material	Part Number
Carbon Steal	H-CPSO
This screw-on coupler provides a tight metal-to-metal seal. Idea for injecting heavy sealant or when working in high-pressure or sour service. Available in carbon steel ONLY.